Patton-electronic 2996 Bedienungsanleitung PDF herunterladen (Seite 48)

Completing the installation 48

Model 2960/2996 RAS User Manual 3 • Configuring the RAS for operation

Note

If the RAS does not respond as described, the most likely cause is that

the RAS default settings are not compatible with the T1/E1 line. If

this is the case, use the RS-232 CONFIG port to correct the RAS set

tings. You will have to examine the T1/E1 Link section in the config-

uration pages in the RAS.

6. There are two LEDs on the RAS 10/100 Ethernet port: a green LED that indicates line speed, and a yellow

LED that indicates link status and activity.

Verify that the yellow LED is either flashing yellow (meaning that packets are being received at the Ether-

net port) or solid yellow (meaning that the link is valid but no packets are being received).

Congratulations! Your RAS is now installed. For more in-depth information about configuring your RAS set-

tings, refer to the Access Server Administrator’s Reference Guide available online at www.patton.com/manuals/

29xx-arg/pdf. Otherwise, refer to

Chapter 4, “Operation and shutdown” for information on activating and

de-activating your remote access server.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 64 65

Keine Kommentare

Patton-electronic 2996 Bedienungsanleitung Seite 48